LIME-OUT (Lime, Limestone Remover and Deposits Remover)

ciller sistem

Micron-grade chemical cleaning product that is breaking down rust, mineral deposits, limestone layer from cooling systems, heat exchanger units, water pipes, boilers.

isitma esanjoru esanjor plakası

once sonra

• Kireci sirkülasyon esnasında mikronize etme özelliğinden dolayı temizleme sırasında tıkanmalara yol açmaz.
• Doesn’t harm any of metal pipes like copper, metal pipes or painted surfaces.
• Used for cleaning the remains of the concrete and mortar after the construction, succesfully.

BEFORE LIME-OUT AFTER LIME-OUT

BEFORE LIME-OUT                                                         AFTER LIME-OUT

IMG_7086_resize  IMG_7089_resize

Product Usage:

Direct Usage: Apply some Lime-Out over the equipment using a brush or piece of cloth dilueted with water on 5 piece according to the state of the sediment. Ensure penetration in a while and removing the sediment.

Immersion Method:  Dip the material to be cleaned into the LIME-OUT and water mixture in a pool or a plastic conainer.
Wait until the sediment is dissolved. After that, take them out and rinse with water thoroughly.

LİME OUT LİME OUT REAKSİYON

Bilers: Empty up the boilers water and fill it again until preliminary level. Add 1 liter of LIME-OUT for 10 liters of water. Raise Water temperature 50-60 ° C. Don’t go over 60˚C. Throw out the gases formed during thermal upgrading. Try to keep Ph in 1,5 – 2 levels for about 4 – 6 hours. Add LIME-OUT If necessary. Check Ph periodicly. Empty up the boiler and refill it with water. Empty up completely after the churning process. Repeat the process if any residue is still present.

Cooling Systems: Empty entire system. Re-fill the system until the working level. Add 1 liter of LIME-OUT for 10 liters of water. Circulate it for about 5 or 6 hours. Measure the Ph of the water in the system. Keep Ph in between 1,5 – 2 and add LIME-OUT if necessary. Resume circulate process. Empty the system after 5 or 6 hours and churning process. Repeat the process if any residue is still present.

rezistans 1 rezistans 2

Caution:
• Avoid contact with skin and eyes.
• Cleaning materials such as Zinc, porcelain, galvanize with LIME-OUT may be objectionable.

[top]